Suspension Upgrade / Low Sheen Paint

Suspension  - brake - steering upgrade / trans tunnel fabrication and install

​

This is an aftermarket full frame installed in a 1967 Mustang

1. All suspension parts were pre-fitted

2. Bodywork finished to give the frame an ultra smooth finish, then PPG 9700 black base applied with PPG 2021

 clear with 30% flatter added for a low sheen finish.

3.Install rack and pinion steering, tubular upper and lower A-arms, adjustable coil over shocks, slightly shortened   9" Ford rear end, full floating Strange axles, adjustable coil overs with Baer 4 piston caliper brakes front and rear

4.Fabricate custom trans mission tunnel with exhaust reliefs, install, seal apply finish.

​

​

​

Wilwood disc brake conversion

Frame stretch and box

2'' lift kit install Silverado

2001 Chevy Silverado 2'' lift kit install

​

1. static measurement

2. remove torsion bar keys, install lifting keys

3. R/R front lower shock bracket with extended bracket

4. remove rear spring shackle bolts

5. install extended shackle bolts and angled lifting blocks

6. adjust front torsion bars leveling front and rear

​